How to Install Android on iPhone 2G [Guide + Video]

So, have you seen Android on iPhone? Now lets see how to install Android on iPhone, on your own iDevice powered by Google’s open source Android or iDroid as they call it. Here is video showing the process to install Android on iPhone 2G followed by the simple guide on how to make a dual boot iPhone and install Android on it besides the already installed iPhone OS.

Before you start installing Android on iPhone:

You will need a jailbroken iPhone

1. Download VirtualBox for Windows or Mac
2. Download VirtualBox Ubuntu image (Download the number 10: Ubuntu Linux 9.10 codename Karmic Koalax86)
3. Download iPhone Explorer for Windows. You can use an FTP client like FileZilla if you’re on Linux.
4. Download Android Images and Resources
5. Download Patched Images

Once you have downloaded all of required files, proceed with following steps:

1. Preparation
2. Setting up Virtual Box
3. Setting up Ubuntu
4. Getting Android working
5. Finishing Off

Preparation

Let’s get some of the basics out of the way:

1. Open Task Manager
2. Kill the iTunes Helper process
3. Install iPhone Explorer
4. Connect your iPhone to your Mac/PC
5. Run iPhone Explorer
6. Click the Change Root button
7. Select “/” Real iPhone Root Directory
8. Browse to private/var
9. Copy ramdisk.img, userdata.img, cache.img and zImage from Downloads#5 (Android images and sources) to that var directory
10. Copy system.img and android.img.gz from Downloads#6 (patched images) to the that var directory
11. That’s all the Android files on your iPhone, now to make them run!

Setting Up Virtual Box

1. Install VirtualBox
2. Open VirtualBox
3. Go on File > Virtual Media Manager
4. Make sure Hard Disks is selected
5. Click Add
6. Locate the ubuntu-9.10.vdi file (download#3) and select it
7. Close Virtual Media Manager
8. Go on Machine > New
9. Click Next
10. Under Name enter “Ubuntu”
11. Select Linux Operating System
12. Select Ubuntu Version
13. Click Next
14. Set an amount of RAM, the default should be fine
15. Click Next
16. Select “Use existing hard disk”
17. Select the ubuntu-9.10.vdi
18. Click Next
19. Click Finish
20. Select that new machine to start up Ubuntu
21. The password to login is: reverse

Setting Up Ubuntu

Almost there – if this feels a bit long, just consider how short and simple each step is!

1. Click System (top bar) > Administration > Synaptic Package Manager
2. Enter the password: reverse
3. In the quicksearch box, type libusb-1.0, click the Check Box next to libusb-1.0-0 and select Mark for installation
4. In the quicksearch box, type libreadline, click the Check Box next to libreadline5 and select Mark for installtion
5. Click Apply
6. When it’s all installed close the Package Manager
7. Open Firefox (in Ubuntu)
8. Download openiboot installer from here
9. Click Places (top bar) > Downloads
10. Right-click openiboot.zip and click Extract Here
11. Click Applications (top bar) > Accessories > Terminal
12. Without the quotes, type ‘cd Downloads/openiboot’
13. Restart your iPhone in Recovery Mode (power off, hold down Home button, connect to USB cable)

Getting Android Working!

Well done on getting this far! This is where the fun beings (credits to WinX Blog for these instructions –link)

1. In VirtualBox, the Ubuntu Window, go on Devices > USB Devices and select iPhone (Recovery Mode)
2. In the terminal type (without quotes): ’sudo su’
3. Enter the password: reverse
4. In the terminal type ./loadibec openiboot.img3
5. You’ll see the OpeniBoot screen appear on your iPhone
6. Hold down the power button a couple of seconds (iPhone)
7. The bottom option, openiboot console, will become selected
8. Press Home (iPhone).  You’ll see a bunch of text appear and stop at “Welcome to openiboot”
9. In VirtualBox, the Ubuntu Window, go on Devices > USB Devices and select iPhone (OpeniBoot Mode)
10. In terminal type su ./oibc
11. Enter the password: reverse
12. If this doesn’t work just type: ./oibc
13. You’ll see the same text from the iPhone in the Terminal
14. Type (without quotes) ‘nor_read 0×09000000 0×0 1048576′ and press Enter
15. Wait for it to say Done
16. Type (without quotes) ‘~norbackup.dump:1048576′
17. This creates a backup of your NOR memory – save a copy on USB stick, or email it to yourself or something
18. Type install, press Enter.  When this is done you’ve got openiboot installed on your iPhone.  You’re done!

Finishing Off

What you’ve achieved up til now is Android files on your iPhone, and then installing openiboot so that you have an option to start iPhone OS or Android when you turn on your phone.  Openiboot was necessary because that’s the only way right now that you can boot into Android.  Here’s how to finish off and get into Android:

1. If you still have Terminal open with the oibc still running, just type ‘reboot’, press Enter and skip to step 3
2. If you don’t have Terminal open, disconnect your phone, turn it off and back on
3. When openiboot appears press Power button to switch to openiboot console (bottom option)
4. Hold down the Home button
5. Android will start to boot, but it might take a while

Preparation

Let’s get some of the basics out of the way:

1. Open Task Manager
2. Kill the iTunes Helper process
3. Install iPhone Explorer
4. Connect your iPhone to your Mac/PC
5. Run iPhone Explorer
6. Click the Change Root button
7. Select “/” Real iPhone Root Directory
8. Browse to private/var
9. Copy ramdisk.img, userdata.img, cache.img and zImage from Downloads#5 (Android images and sources) to that var directory
10. Copy system.img and android.img.gz from Downloads#6 (patched images) to the that var directory
11. That’s all the Android files on your iPhone, now to make them run!

Setting Up Virtual Box

1. Install VirtualBox
2. Open VirtualBox
3. Go on File > Virtual Media Manager
4. Make sure Hard Disks is selected
5. Click Add
6. Locate the ubuntu-9.10.vdi file (download#3) and select it
7. Close Virtual Media Manager
8. Go on Machine > New
9. Click Next
10. Under Name enter “Ubuntu”
11. Select Linux Operating System
12. Select Ubuntu Version
13. Click Next
14. Set an amount of RAM, the default should be fine
15. Click Next
16. Select “Use existing hard disk”
17. Select the ubuntu-9.10.vdi
18. Click Next
19. Click Finish
20. Select that new machine to start up Ubuntu
21. The password to login is: reverse

Setting Up Ubuntu

Almost there – if this feels a bit long, just consider how short and simple each step is!

1. Click System (top bar) > Administration > Synaptic Package Manager
2. Enter the password: reverse
3. In the quicksearch box, type libusb-1.0, click the Check Box next to libusb-1.0-0 and select Mark for installation
4. In the quicksearch box, type libreadline, click the Check Box next to libreadline5 and select Mark for installtion
5. Click Apply
6. When it’s all installed close the Package Manager
7. Open Firefox (in Ubuntu)
8. Download openiboot installer from here
9. Click Places (top bar) > Downloads
10. Right-click openiboot.zip and click Extract Here
11. Click Applications (top bar) > Accessories > Terminal
12. Without the quotes, type ‘cd Downloads/openiboot’
13. Restart your iPhone in Recovery Mode (power off, hold down Home button, connect to USB cable)

Getting Android Working!

Well done on getting this far! This is where the fun beings (credits to WinX Blog for these instructions –link)

1. In VirtualBox, the Ubuntu Window, go on Devices > USB Devices and select iPhone (Recovery Mode)
2. In the terminal type (without quotes): ’sudo su’
3. Enter the password: reverse
4. In the terminal type ./loadibec openiboot.img3
5. You’ll see the OpeniBoot screen appear on your iPhone
6. Hold down the power button a couple of seconds (iPhone)
7. The bottom option, openiboot console, will become selected
8. Press Home (iPhone).  You’ll see a bunch of text appear and stop at “Welcome to openiboot”
9. In VirtualBox, the Ubuntu Window, go on Devices > USB Devices and select iPhone (OpeniBoot Mode)
10. In terminal type su ./oibc
11. Enter the password: reverse
12. If this doesn’t work just type: ./oibc
13. You’ll see the same text from the iPhone in the Terminal
14. Type (without quotes) ‘nor_read 0×09000000 0×0 1048576′ and press Enter
15. Wait for it to say Done
16. Type (without quotes) ‘~norbackup.dump:1048576′
17. This creates a backup of your NOR memory – save a copy on USB stick, or email it to yourself or something
18. Type install, press Enter.  When this is done you’ve got openiboot installed on your iPhone.  You’re done!

Finishing Off

What you’ve achieved up til now is Android files on your iPhone, and then installing openiboot so that you have an option to start iPhone OS or Android when you turn on your phone.  Openiboot was necessary because that’s the only way right now that you can boot into Android.  Here’s how to finish off and get into Android:

1. If you still have Terminal open with the oibc still running, just type ‘reboot’, press Enter and skip to step 3
2. If you don’t have Terminal open, disconnect your phone, turn it off and back on
3. When openiboot appears press Power button to switch to openiboot console (bottom option)
4. Hold down the Home button
5. Android will start to boot, but it might take a while

via AndroidAlot